Section 3 - Configuration
This page allows you to configure the Wireless QoS (WMM) Settings.
ADD WIRELESS QOS CLASSES
Traffic Class Name:
Enter a name for this QoS rule.
Wireless Transmit
Select the wireless transmission priority from the dropdown menu.
Priority:
Select the protocol to apply the rule to: TCP/UDP, ICMP, TCP, UDP.
Protocol:
Source IP address:
Enter the source IP address.
Source Subnet
Enter the source subnet mask.
Mask:
UDP/TCP Source
Enter the source port number or range.
Port:
Destination IP
Enter the destination IP address.
address:
Destination Subnet
Enter the destination subnet mask.
Mask:
UDP/TCP
Enter the destination port number or range.
Destination Port:
Click the Add/Apply button when you are finished.
ACTIVE WIRELESS QOS RULES
The currently defined wireless QOS rules are displayed here.
D-Link DSL-2740M User Manual
Wireless QoS Settings
QoS Setup
WIRELESS QOS
ADVANCED
49