Static Route - D-Link DSL-2740M User Manual

Section 3 - Configuration
Click Static Routes on the navigation menu to configure the Static Route. The Static Routes
section allows you to define custom routes to control how data traffic is moved out of your
network.
Destination IP Enter the IP address of the destination router.
Address:
IP Subnet Mask: Enter the subnet mask of the destination IP address.
Gateway IP Enter the IP address of the gateway router to be used or select if rom
Address: the dropdown menu.
Metric: Enter the metric value.
Announced in RIP: Enable this route to be announced in RIP updates.
Click Apply to have your changes take effect.
ACTIVE ROUTING TABLE LIST
The currently defined Static Routes are displayed here. If you wish to remove a rule, select
it from the table and click the Remove button.
D-Link DSL-2740M User Manual
ADD ROUTING ENTRY

Static Route

Static Route STATIC ROUTE
ADVANCED
53