Wireless Mac Filter - D-Link DSL-2740M User Manual

Section 3 - Configuration
Click Wireless Mac Filter on the navigation menu to configure the MAC address filtering
feature. This feature allows you to configure filters to control which wireless clients can
access your network, and which network resources they can access.
Note: MAC filtering on wireless networks is not a form of security alone.
Status: Use this option to activate or deactivate the Wireless MAC filter.
Wireless SSID: Select the Wireless SSID from the dropdown menu which you wish
to apply MAC filtering to.
Action: Select the access control type: Allow Association to allow only the
listed clients or Deny Association to deny the listed clients.
You may add up to 8 MAC addresses to the Wireless Mac Filter.
Click Apply Settings when you are done.
D-Link DSL-2740M User Manual

Wireless Mac Filter

WIRELESS MAC FILTER
Wireless Mac Filter WIRELESS MAC FILTER
ADVANCED
61