Storing Components - Dell S6100 Installation Manual

Storing components

If you do not install your S6100–ON and components immediately, properly store the system and all optional components by following these
guidelines:
• Storage location temperature must remain constant. The storage range is from -40° to 158°F (-40°C to 70°C).
• Store on a dry surface or floor, away from direct sunlight, heat, and air conditioning ducts.
• Store in a dust-free environment.
NOTE: ESD damage can occur when components are mishandled. Always wear an ESD-preventive wrist or heel ground strap
when handling the S6100–ON and its accessories. After you remove the original packaging, place the S6100–ON and its
components on an anti-static surface.
Site preparations 15