Fan Module Replacement; Fan Air Filter Replacement - Dell S6100 Installation Manual

On system

Hide thumbs Also See for S6100:

Table of Contents

Figure 29. Fan module installation

Release tab

Fan module replacement

NOTE:

Never leave the fan partially inserted. The fan stalls if it is left partially inserted.

Use the grab handle and the orange tab to slide the fan module out of the bay.

Use the grab handle and the orange tab to slide the replacement module into the bay.

Environmental factors can decrease the amount of time required between air filter replacements. Check the environmental factors regularly.

An increase in temperature and/or particulate matter in the air might affect performance.

CAUTION:

Check the fan air filters at six-month intervals and replace them as necessary. To accurately determine air filter

replacement intervals, regularly monitor the speeds of the cooling fans. An increase in overall fan speed may indicate a clogged

filter.

You must replace the fan air filters with new filters; you cannot clean and reuse the old fan air filters. Replacement filter media must meet

the requirements found in GR-63-CORE.

•

Minimum dust arrestance of 65%, per ASHRAE Standard 52.1-1992. OR

•

Minimum Efficiency Rating Value (MERV) of 2, per ANSI/ASHRAE Standard 52.2-2007.

CAUTION:

For NEBS compliance, use NEBS-approved

filters.

Fans

Fan module

Table of Contents