Dc Power Supply Connection - Dell S6100 Installation Manual

Figure 25. Power supply installation
1 Power supply unit
When you install the PSU correctly, it snaps into place and is flushed with the back of the switch.
4 Plug in the appropriate AC three prongs power cord from the switch PSU to the external power source.
5 Repeat steps 1 through 4 above using the second PSU slot on the S6100-ON system.
NOTE: The S6100-ON powers up when the cables are connected between the power supply and the power source.

DC power supply connection

Each DC powered system comes with a set containing a prewired, 3-inch 8 AWG, power supply connector and a four-screw wiring block.
One set is provided for each DC PSU.
2 Release tab
Power supplies 35