Advertisement
3.1.8 Removing the Micon board (See Fig.15)
(1) Disconnect the connector wire from Micon board connect-
ed to connector
CN101
(2) Disconnect the card wire from SCART board connected to
connector
CN711
of the Micon board.
(3) Disconnect the card wire from Loader board connected to
connector
CN701
of the Micon board.
(4) Disconnect the card wire from Front end board connected
to connector
CN708
of the Micon board.
(5) Remove the two screws T attaching the Micon board.
3.1.9 Removing the Digital amp board (See Fig.16)
(1) Disconnect the connector wire from Digital amp board con-
nected to connector
CN301
(2) Remove the one screw U attaching the Digital amp board.
of the Digital amp board.
of the Speaker terminal board.
T
CN711
Fig.15
Fig.16
(No.MB658<Rev.001>)1-11
CN701
T
CN708
CN101
U
CN301
Advertisement
