Advertisement
3.1.7 Removing the Main board (See Fig.12 to 14)
(1) Disconnect the card wire from Micon board connected to
connector
CN202
of the Main board. (See Fig.12)
(2) Disconnect the card wire from DVD mechanism connected
to connector
CN206
of the Main board. (See Fig.12)
(3) Disconnect the connector wires from Main board connect-
ed to connector
CN102
board. (See Fig.12)
(4) Remove the three screws S attaching the Main board. (See
Fig.12)
(5) Disconnect the connector wires from Main board connect-
ed to connector
CN713
(See Fig.13)
(6) Disconnect the Earth wire from bottom chassis connected
to test point
TP201
and
Fig.14)
S
CN202
CN206
1-10 (No.MB658<Rev.001>)
and
CN103
of the Digital amp
and
CN714
of the Micon board.
TP204
of the Main board. (See
S
CN102
CN103
S
Fig.12
CN714
CN713
Fig.13
TP201
TP204
Fig.14
Advertisement
