Troubleshooting; No.yd087)1 - JVC DR-MV2SEU Service Manual

5.1 HOW TO INITIALIZE THE DVD RECORDER
To put the program back at the factory-default, initialize the DVD
recorder as the following procedure.
(1) Turn the DVD recorder on.
(2) Confirm that no disc is loaded or that the disc tray is open.
To put the DVD recorder into the Version display mode,
press [ ], [1], [2], and [3] buttons on the remote control in
that order.
Fig. 1 appears on the screen.
*1: " ******* " differs depending on the models.
*2: Firmware Version differs depending on the
models, and this indication is one example.
F/W VERSION
Model Name : *******
Firmware V ersion
BE : W2V3176H2S
FE : R20_057_000
API : Ver 1.08
TT : T20198FSP
DEFAULT SETTING : ENTER
EXIT : RETURN
Version Display Mode Screen
(3) Press [ENTER] button, then the DVD recorder starts initial-
izing. When the initializing is completed, the DVD recorder
exits the Version display mode and turns off the power au-
tomatically.
• To move into the Normal mode from the Version display
mode, press [RETURN] button on the remote control in-
stead of [ENTER] button.
• When [STANDBY/ON] button is pressed before [EN-
TER] button is pressed, the DVD recorder exits the Ver-
sion display mode, then the power turns off.
1-36 (No.YD087)
SECTION 5

TROUBLESHOOTING

Fig.1