S-19) (S - JVC DR-MV2SEU Service Manual

Messag e
This disc is protected and not
recordable.
Disc is full.
(No area for new recording)
You cannot record more than
99 titles on one disc.
(The maximum is 99.)
You cannot record more than
999 chapters on one disc.
(The maximum is 999.)
You cannot record on this disc
as Control Information is full.
You cannot record on the disc
as Power Calibration Area is
full.
This disc is already finalized.
Can not record on this disc.
If an error occurs during the timer recording, one of the following error numbers (40 to 42) or the above error messages (error number:
1 to 39) is displayed on the recording menu after timer recording.
(Once the screen of the program line is exited, the program line for the error will be cleared.)
(No Error Message is displayed for the error No. 40 ~ 42.)
A program with the error number is grayed out and asterisked on the timer programming list.
Messag e
Error message is not
displayed.
1-40 (No.YD087)
Solutio n
Release the disc protect
setting in the Disc Setting
menu.
Insert the recordable disc with
enough recording space.
Delete unnecessary titles.
Delete unnecessary chapter
markers.
Delete unnecessary titles.
Insert a new disc.
Release the finalizing for this
disc.
Repeat the same operation.
Timer Pr ogramming
DVD
Date Start End CH Speed
VCR
* JAN/01 12:57AM 1:57AM 8 D VD
2. ---
3. ---
4. ---
5. ---
6. ---
7. ---
8. ---
Solutio n
- Set the timer programming
correctly.
- Set the timer programming
before the start time.
- Insert a recordable videotape
with a record tab.
Turn the power on and set the
clock correctly then set timer
programming again.
Insert the recordable disc.
Error
Error Descr ipt ion
No.
29 Disc Protected Disc.
30 There is no it in a space field.
It is recorded a 99 title. (Video Format
31
Disc)
32 It is recorded a 99 title. (VR Format Disc)
There is 999 number of total chapter. (VR
33
Format Disc)
There is not a space to a record field of
34
control information.
35 PCA Full. (in REC start)
36 It is done Finalize. (Video Format Disc)
37 Access to Memory Area range outside.
38 Sector Address is wrong.
39 BUP writing error of chapter editing.
VCR DVD
VPS
PDC
E40 The speed mode changes
to the error number.
Error
Error Descr ipt ion
No.
- Some portion has not been recorded
because of program overlapping.
40 - Recording did not start at the start time.
- No Videotape is inserted.
Videotape ran out during recording.
41 Power failed
42 No disc when recording
Priorit y
7
5
7
8
9
10
4
6
-
-
-
Priorit y
-
-
-