Table of Contents
Advertisement
Troubleshooting
Troubleshooting
Problem
No power
Tape cannot be ejected
No picture
No colour
Shuttle search does not function
Disturbances in playback picture
Remote control does not function
Auto playback does not function
Recording does not function
The video cassette player does not
function properly
About Head cleaning
8
If the picture playback becomes blurred, it does not mean that the recorded program has
been erased.
8
Dirt accumulated on the video heads after long periods of use causes such troubles. In this
case, head cleaning requiring highly technical care is necessary.
8
For head cleaning, consult the nearest JVC dealer.
Is the power cord plugged in?
Is the power turned on?
Was the video cassette player's ¤ button or the 0
EJECT button on the remote control pressed?
Is the TV set to the video channel?
Is a cassette loaded?
Are the connections correct?
Set the Colour System Output switch according to
the recorded tape system.
Is the video cassette player in the playback
mode?
Is tracking adjusted properly?
Is the TV adjusted properly?
Install this VCP a little way apart from the TV set.
The batteries are weak.
Replace the batteries.
The video cassette's recording safety tab has
not been removed.
Are the connections correct?
Was the Record button pressed?
The video cassette's recording safety tab is removed.
Microcomputer malfunction.
Disconnect the power plug from the AC outlet and
then re-insert it.
The microcomputer will be reset to its initial mode.
Check point
15
Advertisement
Table of Contents
