Disassembly - JVC DR-MV2SEU Service Manual

3.1 CABINET DISASSEMBLY INSTRUCTIONS
3.1.1 Disassembly Flowchart
This flowchart indicates the disassembly steps to gain access to
item(s) to be serviced. When reassembling, follow the steps in
reverse order. Bend, route, and dress the cables as they were
originally.
3.1.2 Disassembly Method
ID/ PART
Loc.
No.
[1] Top Cover
[2] Front Assembly
[3] Front Bracket
[4] Radiation Sheet
[5] Jack Bracket
[6] Front Jack CBA
[7] DVD Mechanism&DVD
Main CBA Assembly
[8] Rear Panel Unit
[9] Power Supply CBA
[10] DC Fan Motor
[11] PCB Holder
[12] Rear Panel
[13] Bracket R
[14] VCR Chassis Unit
[15] Deck Assembly
[16] Power SW CBA
SECTION 3

DISASSEMBLY

REMOVAL
Fig. REMOVE/*UNHOOK/
No. UNLOCK/RELEASE/
UNPLUG/DESOLDER
1 6(S-1)
2 *5(L-1), *3(L-2),*CN1505 (1)
2 2(S-2), (S-3),
2 ----------
3 2(S-4)
3 Jack Earth Plate
4 2(S-5A), 2(S-5B),
*CN501, *CN601
5 2(S-6A), 2(S-6B),
3(S-7), (S-8A), (S-8B),
*CN1503, *CN1504
6 4(S-9)
6 2(S-10)
6 3(S-11), Earth Plate
6 ----------
7 2(S-12)
7 5(S-13), 3(S-14A),
2(S-14B), (S-15), (S-16)
8 (S-17), (S-18), Desolder (2)
8 Desolder
[16] Power
SW CBA
[14] VCR
Chassis Unit
[18] Rear
Jack CBA
[19] Main,
AFV CBA
[10] DC
Fan Motor
[8] Rear
Panel Unit
[9] Power
Supply CBA
[11] PCB
Holder
ID/ PART
Loc.
Note
No.
[17] Function CBA
-
[18] Rear Jack CBA
a)
[19] Main, AFV CBA
b)
[20] Deck Pedestal
c)
[21] Front Bracket R
-
↓ ↓
-
(1) (2)
-
Note:
-
(1) Identification (location) No. of parts in the figures
- (2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked, un-
-
locked, released, unplugged, unclamped, or desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
-
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 6(S-1) = six Screws (S-1),
-
5(L-1) = two Locking Tabs (L-1)
-
(5) Refer to "Reference Notes."
-
-
-
(3)
-
[20] Deck
Pedestal
[15] Deck [6] Front Jack
Assembly CBA
[17] Function [5] Jack
CBA Bracket
[2] Front
Assembly
[3] Front
[1] Top Cover
Bracket
[4] Radiation [21] Front
Sheet Bracket R
[7] DVD
Mechanism
& DVD Main
CBA Assembly
[12] Rear
Panel
[13] Bracket R
REMOVAL
Fig. REMOVE/*UNHOOK/
No. UNLOCK/RELEASE/
UNPLUG/DESOLDER
8 Desolder
8 Desolder, Ground Plate
8 ----------
9 8(S-19)
9 (S-20)
↓ ↓
(3) (4)
(No.YD087)1-11
Note
-
-
-
-
-
↓
(5)