Table of Contents
Advertisement
This chapter shows you the starting point of VIP-100T to be
integrated into your network and/or Internet. Configuration steps
in this quick guide will be focused on keypad configuration. More
detail configuration, including keypad, web, and telnet
instructions will be illustrated in respective chapters in user's
manual.
2.1 Initialize VIP-100T
2.1.1 Start up
(a) Power on, the LCD screen shows as below.
(b) Wait a moment until VIP-100T finishes boot program
initialization.
(c) You can see flashing greeting as below:
(d) Then VIP-100T will come into standby mode: The main
LCD screen would be shown as similar as following. The
P2P word means VIP-100T is now in Peer-to-Peer Mode,
and when VIP-100T is connected to SNTP server, on LCD
will show current time obtained from SNTP server.
P2P
2. BASIC CONFIGURATION
VIP-100T
Board Start Booting
System Initializing...........
VIP-100T
10:10:10 AM
PLANET VoIP
Advertisement
Table of Contents
