Base Station, Select; Range; Unregister A Handset - Philips VOIP321 User Manual

Registering
Register a new handset to base station
Each base can register up to 4 handsets.
1. In idle mode, press
2. Select ADVANCED SET and press OK.
3. Select REGISTRATION and press OK.
4. Before you enter the PIN, long press
Note : If the base is full, the base would not go into registration mode. See the section "Unregister a
handset", page 33 to unregister a currently registered handset.
Note : The range of this handset is 250 m outdoor and 50 m indoor. An out of range warning will be
emitted and the range icon will be flashing on the display if you move too far away from the base unit
during a call. You will need to move closer to the base unit or your call will be disconnected.

Unregister a handset

A handset can un-register another handset registered to the same base. It can also un-register itself.
1. In idle mode, press
2. Select ADVANCED SET and press OK.
3. Select DELETE HS and press OK.
4. Select the handset you would like to un-register and press OK.
5. Enter the PIN (by default PIN is "0000") and press OK to confirm.
Select the base station
If your handset is registered to more than 1 base, you can select which base the handset will use.
1. In idle mode, press
2. Select ADVANCED SET and press OK.
3. Select BASE SELECT and press OK.
4. Select the base to use and press OK.
Note : Bases your handset is registered to which is not Philips VOIP 321 base will be labelled as GAP
BASE; your Philips VOIP 321 base will be labelled as BASE in Base Select.
Other features
.
on the base for 4 seconds.
.
.
EN
33