Connector Descriptions; Led Descriptions - Multitech FF-240 Hardware And Installation Manual

HARDWARE AND INSTALLATION

Connector Descriptions

Label
1-8
+12V
CONSOLE
USB
RESET
LAN 1

LED Descriptions

Label Name
Speed Speed
Link/Act Link / Activity
HDD High Density
Drive
Power Power
One set of the following for each modem/port:
TD Transmit Data
RD Receive Data
CD Carrier Detect
16
FaxFinder FF240-IP Connectors
Description
PSTN/POTS RJ 11 phone line ports. The FaxFinder 240 has ports 1-2, the FaxFinder 440 has
ports 1-4, and the FaxFinder 840 has ports 1-8. Ports on the back line up with the modem
LEDs on the front.
Power receptacle for provided power cord.
DE-9 connection for serial access and control of the FaxFinder.
Not used at this time.Used to connect a FaxFinder Expansion Unit.
Use to reboot the FaxFinder.
RJ-45 receptacle for network connection.
Description
When lit, if the color is:
Green: Ethernet rate is 1000 Mbps
Yellow: Ethernet rate is 100 Mbps
Unlit: Ethernet rate is 10 Mbps
Lit when a physical link has been established with the Ethernet network. Blinks
when there is activity.
When the internal hard drive is accessed, this LED is yellow. When unlit, HDD is
not being accessed.
Solid (constant) green if unit is on.
TD LED flashes when the modem transmits data to another modem.
RD LED flashes when the modem receives data from another modem.
Carrier of remote modem is detected.
®
FaxFinder Fax Server FF-240, FF-440, FF-840, FF240-IP Hardware and Installation Guide
FaxFinder FF240-IP LEDs