HARDWARE AND INSTALLATION
4.
Secure the bracket to left side using three provided screws.
5.
Remove feet (4) from the unit.
6.
Secure the unit to rack rails by the brackets and mount the FaxFinder in the rack enclosure per the rack
manufacturer's mounting procedure. Because equipment racks vary, screws for rack-rail mounting are not
provided. Follow the instructions of the rack manufacturer and use screws that fit.
Mounting FaxFinder on a Wall
Use these steps to mount FaxFinder on a wall.
1.
Position a mounting bracket on the right side using two mounting screw holes.
20
Dimensions with brackets attached for wall mounting (top view)
Dimensions with brackets attached for wall mounting (front view)
®
FaxFinder
Fax Server FF-240, FF-440, FF-840, FF240-IP Hardware and Installation Guide