RCA 301 Programmer's Reference Manual page 66

y
- Subtract tSUB)
General Description
This instruction performs decimal subtraction in accordance with algebraic rules producing a non-zero suppressed
difference which is stored in the memory location originally occupied by the minuend. The two operands must be
equal in length, but of any length up to forty-four characters for each operand.
Format
Operation — (minus)
N —Number (0-44) of characters in each operand. (See Appendix F-I.)
A Address — HSM location of least significant digit of the minuend and the difference.
B Address — HSM location of least significant digit of the subtrahend.
Direction of Operation
Right to left.
Outline of Operation
This instruction operates in the following cycle:
The contents of the N Register are examined. If zero, the instruction terminates. If other than zero, the contents
of the HSM location specified by the A Register are transferred to the D
of the HSM location specified by the B Register are transferred to the D
the D Register are used to generate an address in the Sum or Difference Table located in HSM depending on the
sign in each operand. If the signs of the operands are alike, the Difference Table is addressed; if unlike the Sum
Table is addressed. The character thus addressed is transferred to the HSM location specified by the A Register.
The contents of the A, B, and N Register are decremented by one and the cycle is repeated.
K
The sign of each operand does not require a separate character location, but is indicated by the 2
least significant digit (LSD) of each operand. When a one bit is present in the 2
Otherwise it is assumed positive.
In the event there is a carry beyond the most significant digit (MSD) of the result, a one bit is placed in the 2
bit position of the MSD of the result, and the first Overflow Indicator, which is present in all Processors, is set.
In a processor with a 40,000 character memory, there may be an additional overflow carry from the 2
position of the MSD of the result, and a second Overflow Indicator set. The 2
the result then act as a two bit binary counter. Each Overflow Indicator can be sensed by the Conditional Transfer
of Control instruction.
When there is a carry beyond the MSD of the result; and the first Overflow Indicator has already been set in a
computer containing only one Overflow Indicator, the computer stops on an alarm. When there is a carry beyond the
MSD of the result in a computer with a second Overflow Indicator and this indicator has already been set, the
computer stops on an alarm.
The only allowable one zone bits in the operands of a subtraction for a processor with up to 20,000 characters,
are in the 2 4 bit position of the MSD and the 2
bits in the operands of a subtraction, for a processor with 40,000 characters, are the 2
MSD and the LSD.
In single character operands, however, a one bit in the 2
40,000 character processor.
If the operands have like signs, and the larger, in absolute value, is the subtrahend, then this causes the "end
around condition" when N equals zero. By the use of the Difference Table, the difference is complemented to give
the correct result.
VI-6
portion of the D Register; the contents
2
portion of the D Register. The contents of
3
4 and the 2 5 bit positions of the LSD. The only allowable one zone
4
position of either operand causes an alarm stop in a
Repeatable
5
bit of the
5
position, the sign is negative.
4
to the 2
4 5
and 2 bit positions of the MSD of
4 and 2 5 bit positions in the
4
5
bit