RCA 301 Programmer's Reference Manual page 216

O p .
Ins tructi on
C o d e
A Translate by Table
B Print and Paper Advance
Normal
C Print and Paper Advance
Simultaneous
D Band Select Normal
Track Select
D
Band Select Record File Mode
E
F Block Read Record Normal
F Sector Read Disc Normal
G Block Read Record
Simultaneous
* STA or STP where applicable, and staticizing time included in formulas,
t
Time here in milliseconds,
t
Time here in seconds.
§ Does not include staticizing time, stop-start, or switching time.
D-l
APPENDIX D. I NSTRUCTION TIMING*
T i m i n g i n ju s
21n + 35
a. 60$
b. 76$
c. 6.67 ms. per line
a. 60$
b. 76f
c. 6.67 ms. per line
a. 21(6^ +
14(B ) + 42
2
b. 3.1$
a. 42
363-2 363-3 363-4 363-5
b. 105$ 125$ 145$ 145$
c. 150$ 160$ 185$ 185$
a. 21(Bj) +
14(B ) + 42
2
b. 3.1$
a. 2.5 KC
b. 400$
c. 3.04$
d. 1.6$
a. 25$
b. 32 KC
a. 2.5 KC
b. 400$
c. 3.04$
d. 1.6$
E x p o s i t o r y N o t e s
n = no. of characters to be translated
a. Print and paper advance of one line
in Synchronous Mode
b. Print and paper advance of one line
in Asynchronous Mode
c. Paper advance rate after first line
a. Print and paper advance of one line
in Synchronous Mode
b. Print and paper advance of one line
in Asynchronous Mode
c. Paper advance rate after first line
a. To initiate selection
b. Average time to perform Band Selection
(Band located on record 32 positions
from turntable)
a. To initiate selection
b. Average selection time
c. Maximum selection time
a. To initiate selection
b. Average time to perform Band Selection
(Band located on record 32 positions
from turntable)
a. Character transfer rate
b. Inter-cell gap time and read a cell
c. Average time to begin reading from
the fifth cell of a band
d. Return record to cage
a. Average File Latency
b. Character transfer rate
a. Character transfer rate
b. Inter-cell gap time and read a cell
c. Average time to begin reading from
the fifth cell of a band
d. Return record to cage