Coil_E1 - Allen-Bradley 2094-AL15S Installation Instructions Manual

52 Line Interface Module
Specifications
Designators Attribute
AC input voltage
VAC LINE
(IPL) connector
AC input frequency
VAC LOAD
Main AC output current (rms)
(OPL) connector
Control power output (CPL) AC output current (rms)
connector
and
AC output voltage
Auxiliary power output
(P2L) connector
Brake power output (P1L)
connector
24V DC power supply
and
I/O (IOL) connector
Contactor control voltage
Contactor control current
Contactor pickup current
Contactor (CR1) Contactor hold-in current
Contactor voltage
Contactor pickup time
Contactor dropout time
(1) Power specifications for DC-interface module (100 JE) COIL_E1 and COIL_E2 input.
(2) Current provided by auxiliary VAC input.
(3) Sum of CPL and P2L current must not exceed 3 A.
(4) Sum of P1L and IOL current must not exceed 20 A.
This section provides power, fuse, weight, and environmental specifications for
the line interface modules.
Power Specifications
Table 30 - Power Specifications (catalog numbers 2094-AL S and 2094-BL S)
2094-AL S (230V)
AL15S AL25S
195...265V rms 3-phase
(230V nom)
47...63 Hz
15 A 25 A
(3)
3 A
195...265V rms single-phase
(230V nom)
(4)
20 A
(1)
21.6...26.4V DC
(1)
12...9 mA
(2)
N/A (Internal)
(2)
N/A (Internal)
N/A (Internal)
18.5 ms (min) 30.0 ms (max)
10.0 ms (min) 60.0 ms (max)
Rockwell Automation Publication 2094-IN005H-EN-P - October 2012
AL50S AL75S BL10S
380...520V rms 3-phase
(460V nom)
47...63 Hz
50 A 75 A 10 A
(3)
3 A
190...260V rms single-phase
(230V nom)
(4)
20 A
21.6...26.4V DC
12...9 mA
N/A (Internal)
N/A (Internal)
N/A (Internal)
18.5 ms (min) 30.0 ms (max)
10.0 ms (min) 60.0 ms (max)
2094-BL S (460V)
BL25S BL50S BL75S
25 A 50 A 75 A