Catalog Number Explanation - Allen-Bradley 2094-AL15S Installation Instructions Manual

Catalog Number Explanation

Cat. No.
2094-AL15S
2094-AL25S
2094-AL50S
2094-AL75S
2094-BL10S
2094-BL25S
2094-BL50S
2094-BL75S
2094-XL75S-C1
2094-XL75S-C2
2094-AL09
2094-BL02
Before You Begin
Catalog numbers and descriptions for the line interface module are listed in the
table below.
Input Current
Description
Voltage Rating
15 A
25 A
230V
• 230V AC auxiliary power output.
50 A
• Customer-configurable branch-circuit
protection. This feature provides the
75 A
option for connecting CB2 and CB3 before
10 A or after the main (CB1) disconnect.
See Configure Branch-circuit Protection
25 A
page 40 for more information.
460V
50 A
75 A
230/460V 75 A 110V AC auxiliary power input.
230/460V 75 A 230V AC auxiliary power input.
230V 20 A • 24V DC power output with 8 A current capacity.
• Internal 3-phase line filter.
460V 30 A
• Internal 230V AC control line filter.
Before you begin mounting your line interface module, make sure you:
• unpack your line interface module.
• understand the mounting requirements.
• establish noise zones.
Unpack Your Line Interface Module
Remove all packing material, wedges, and braces from within and around the
components. After unpacking, check the item nameplate catalog number against
the purchase order.
Line interface modules ship with the following items:
• Connector set for 2094-ALxxS, 2094-BLxxS, and 2094-XL75S-Cx line
interface modules includes I/O (IOL), VAC line (IPL), VAC load (OPL),
control power (CPL), 24V brake/IO power (P1L), auxiliary 230V Output
(P2L), and auxiliary 230V input (APL) connectors.
• Connector set for 2094-AL09 and 2094-BL02 line interface modules
includes VAC line (IPL), VAC load (OPL), control power (CPL), and
24V brake I/O power (PSL) connectors.
The I/O (26-pin) connector for 2094-AL09 and 2094-BL02 line interface
modules is not provided. See
number and a complete description of the connector sets.
• These installation instructions, publication 2094-IN005.
Rockwell Automation Publication 2094-IN005H-EN-P - October 2012
• 24V DC power output with 20 A current capacity.
• Branch circuit protection and disconnect when used with the
variable-depth rotary mechanism (catalog number
140U-H-RM12B).
on
• Power to multiple Bulletin 2093 or 2094 power rails.
• Internal 24V DC I/O line filter.
• Internal 230V AC control line filter.
• External (customer supplied) 3-phase line filter.
Accessories on page 51
Line Interface Module 3
for the catalog