Io_Pwr1 - Allen-Bradley 2094-AL15S Installation Instructions Manual

44 Line Interface Module
Bonded Cabinet
Ground Bus*
VAC LINE 3-phase (IPL) Input
195-264V AC RMS
or 324-528V AC RMS
In the example configuration below, the servo drive has input power, brake
power, and the start/stop string wired from a 2094-AL09 or 2094-BL02 line
interface module. These modules contain an AC line filter, so an external filter is
not required.
Figure 38 - Power-interconnect Diagram (line interface module with drive)
2094-AL09 or 2094-BL02
Line Interface Module
Single-phase (CPL) Output
195-264V AC RMS
Ground
VAC LOAD 3-phase (OPL) Output
L3
195-264V AC RMS
L2
or 324-528V AC RMS
L1
MBRK_PWR
MBRK_COM
Brake and I/O Output
MBRK_PWR
(PSL) Connector
MBRK_COM
IO_PWR
I/O (IOL)
Connector
COIL_A1
IO_COM
COIL_A2
Rockwell Automation Publication 2094-IN005H-EN-P - October 2012
1
L2
Control Power
2
L1 Connections
L3
L3'
L2
L2'
L1
L1'
1
24V for motor brakes
2
or other as needed
3
24V for motor brakes
4
or other as needed
24-26
* INDICATES USER SUPPLIED COMPONENT
STOP *
13
20-22
Contactor Enable
4
Connections
Ground Stud
Drive Module *
Ground and
3-phase
Input (IPD)
Connections