Allen-Bradley 1441-PEN25 Release Notes page 6

6 Enpac 2500 Data Collector Version 3.10
Table 2 - Enhancements with the Enpac 2500 data collector, firmware revision 1.03...3.0
Operating Enhancement
System Version
1.03 Improved Route
Navigation
Improved Review Data
Screen
New OffTour Review
Screen
Support of Longer
Character Names
Support of Six Hierarchy
Levels
Description
A Navigation parameter has been added to the Setup screen that allows you to choose how you move through routes in the Data
Collection and Review Data screens. The following choices are available:
• Enpac - The unit displays a Selection screen when the RIGHT ARROW key is pressed in the Data Collection or Review Data
screen. The Selection screen allows you to select the item that you want to collect or review.
• DataPac - The unit functions like a Datapac® 1500 data collector in that it automatically advances to the next point (train,
machine, point) in the route when the RIGHT ARROW key is pressed in the Data Collection or Review Data screen.
Two new functions have been added to the Review Data screen: Offtour and View. These functions make it easier to review
previously collected route and off route data.
The Offtour button displays a list of off route measurements collected for the route. The Offtour function is present only if an off
route measurement is collected.
The View button displays the overall, FFT spectrum for the selected measurement. It is present only if data is available for the
selected measurement.
IMPORTANT: If the point has more than one measurement, you must press READ/OK to view the additional measurements. The
Next and Previous functions are no longer available on the Review Data screen.
The Off Tour Review screen displays a list of previously collected off route measurements. Click the Offtour button on the Review
Data screen to access the Off Tour Review screen.
Highlight the off route measurement you want to review and click View. The Enpac 2500 displays the Overall or FFT spectrum if it
is available.
IMPORTANT: If the point has more than one measurement, you must press READ/OK to view the additional measurements. The
Next and Previous functions are no longer available on the Review Data screen.
The Enpac 2500 supports up to 32-character names p7er hierarchy level. The Emonitor software supports the following character
lengths:
• Route - up to 16 characters
• Location - up to 16 characters
• Hierarchy - up to 32 characters
The Enpac 2500 data collector supports up to six hierarchy levels for each point. The hierarchy levels are defined by the structure of
the database in the Emonitor software. Refer to the Emonitor online help for assistance in setting up the hierarchy levels.
Rockwell Automation Publication GMSI10-RN004B-EN-E - August 2012