Allen-Bradley 1441-PEN25 Release Notes page 4

4 Enpac 2500 Data Collector Version 3.10
Table 1 - Enhancements with Revision 3.10
Cat. No. Enhancement
1441-PEN25 The Addnl Measts option on the Enpac 2500 data collector has been replaced by the Multi-meas View on the Enpac
2500 data collector. This is where you select which measurements have signature shown. For measurements
1441-PEN25-Z
where the Signature is not shown, the new Multi-measurement Summary table is displayed, filling in with each
overall reading as the measurement is collected.
A multi-line status bar appears in the display that avoids messages appearing over the signature trace. The status
bar uses color to show status: Green = taken, Red = taken in alarm or error.
The overall bar beside signature shows overall reading, for example, the power bar indicator in the Emonitor
software. Errors are reported in the status bar, and fewer pop-ups are displayed, for example, an ICP Error.
The speed entry for Orbit (untrig) or X-ch Phase is now integrated into the Main Collection screen; it's not a pop-up.
Triggered Alarm Bands are listed in the status bar when collecting and reviewing data. This makes it easier to see which alarms are triggered.
The Enpac 2500 data collector, version 3.10 supports the Secure Digital High Capacity (SDHC) storage cards that are supported by the Microsoft Windows CE
driver.
Rockwell Automation Publication GMSI10-RN004B-EN-E - August 2012