Allen-Bradley 1441-PEN25 Release Notes page 20

20 Enpac 2500 Data Collector Version 3.10
Additional Resources
Follow these steps to replace the battery.
1. Using a flat head screwdriver, remove the two latch screws on the battery
access panel.
2. Remove the battery access panel.
3. Press the Reset button using a 1/16th inch diameter pin or a straightened
paper clip.
4. Replace the battery access panel and tighten the two screws.
The Enpac 2500 data collector automatically powers on.
Allow at least thirty seconds for the instrument to reconfigure and activate the
display after the Instrument Setup screen appears.
The current date, time and some status information will be lost, and
IMPORTANT
the backlight setting will be returned to the default setting following a
hardware reset.
See the Enpac 2500 User Manual, publication
information about setting the date and time.
Any data held in internal memory is secure and will not be lost nor
IMPORTANT
destroyed during a hardware reset.
These documents contain additional information concerning related products
from Rockwell Automation.
Publication
Enpac 2500 User Manual, publication
Industrial Automation Wiring and Grounding Guidelines,
publication 1770-4.1
Product Certifications website, http://www.ab.com
You can view or download publications at
http://www.rockwellautomation.com/literature/. To order paper copies of
technical documentation, contact your local Allen-Bradley distributor or
Rockwell Automation sales representative.
Rockwell Automation Publication GMSI10-RN004B-EN-E - August 2012
Description
GMSI10-UM002 Provides information about how to use the Enpac 2500
data collector.
Describes the general guidelines for installing a Rockwell
Automation® industrial system.
Provides the declarations of conformity, certificates, and
other certification details.
GMSI10-UM002 for