Allen-Bradley 1441-PEN25 Release Notes page 13

Before performing the 3.10 firmware upgrade, take note of the modules installed
on the Enpac 2500 data collector.
To confirm which modules that are installed and the version by press F3 (About) on the
TIP
Main Screen.
Table 6 - Data Collector Modules
Cat. No. Module
1441-PEN25-MOD-BAL Balancing Upgrade
1441-PEN25-MOD-BMP Bump Test
1441-PEN25-MOD-FRF FRF - Frequency Response Function
1441-PEN25-MOD-RUCD RuCD - RunUp CoastDown
1441-PEN25-MOD-REC Recorder
1. After downloading the Enpac 2500 3.10 Upgrade .zip file as instructed in
Operating System Update Procedures on page
instructions.
2. Connect your data collector to your computer by using the USB
connection.
3. Start Microsoft ActiveSync to be connected to the data collector.
4. Extract the .zip file.
5. Double-click the OS Loader.msi file.
Rockwell Automation Publication GMSI10-RN004B-EN-E - August 2012
Enpac 2500 Data Collector Version 3.10 13
Version
12, follow these