Table of Contents
Advertisement
CAUTIONS AND NOTES
This instruction manual is intended to aid the installer in the overall
process of correct installation at the desired location. Periodically, the
manual will illustrate "warnings, cautions and notes" which are items
the installer should carefully read to prevent damage to the gate, gate
system or personal injury to yourself or others.
EXTREMELY IMPORTANT
Anyone who installs, assists with installation or otherwise facilitates
the installation in any manner should thoroughly read and understand
this manual in its entirety before any attempt is made to actually begin
the installation process.
ETL DEFINITIONS COMPLIANT TO UL325
• Vehicular Swing-Gate Operator (or system) - A vehicular gate
operator (or system)that controls a gate which slides in a horizontal
direction that is intended for use for vehicular entrance or exit to a
drive, parking lot, or the like.
• Gate - A moving barrier such as a sliding, swinging, raising,
lowering, rolling, or like barrier that is a stand-alone passage
barrier or is that portion of a wall or fence system that controls
entrance and/or egress by persons or vehicles and completes the
perimeter of a defined area.
• Residential Vehicular Gate Operator - Class I - A vehicular gate
operator (or system) intended for use in a home of one to four
single family dwellings, or a garage or parking area associated
therewith.
• Commercial / General Access Vehicular Gate Operator - Class
II - A vehicular gate operator (or system) intended for use in a
commercial location or building such as a multi-family housing
unit (five or more single family units), hotel, garages, retail store, or
other buildings servicing the general public.
• Commercial / General Access Vehicular Gate Operator - Class
III - A vehicular gate operator (or system) intended for use in
an industrial location, loading dock area, or other location not
intended to service the general public.
• Commercial / General Access Vehicular Gate Operator - Class
IV - A vehicular gate operator (or system) intended for use in a
guarded industrial location or buildings such as airport security
area or other restricted access locations not servicing the general
public, in which unauthorized access is prevented via supervision
by security personnel.
1 - OVERVIEW
This manual provides documentation that covers the layout,
construction, mechanical, electrical installation, and programming
of the TITAN12L/12L1 swing gate operator with the Nice brand 936
or 1050 control board. The TITAN12L/12L1 swing gate operator is
intended for residential gate installations only. Please consult your
Nice distributor or Nice Dealer/Installer for more information regarding
installations or questions not specifically covered in this manual.
1.1 - TITAN12L/12L1 Swing Gate Opener
The Titan 912L swing gate operator delivers the next generation of
easily installed, configured and maintained swing gate operators
from Nice. With a maximum gate capacity of 600 lbs and 20 ft, this
operator has a key lockable manual release, easily accessible limit
switch settings as well as simple in-the-field maintenance and repair.
The Titan gives dealers, installers and homeowners the ability to take
control of their access and security systems. This operator includes
a 2-year factory warranty against manufacturing defects and lifetime
customer support.
4
www.niceforyou.us
1.2 - TITAN12L/12L1 Swing Gate Opener Specifications
Operator Specifications
Maximum Swing Gate Length
Maximum Swing Gate Weight
Solar Compatible
Manual Release with Key-lock
Motor Encoder
Maximum Degree of Opening
Easily Positioned Limit Switches
Drive Mechanism
Operating Temperature
Weight
Dimensions - Fully Retracted
Push to Open Installation
Pull to Open Installation
UL 325 Certified/Listed
2 - GATE INFORMATION
2.1 - ASTM F2200
Gates shall be constructed in accordance with the provisions
given for the appropriate gate type listed, refer to ASTM F2200 for
additional gate types.
Protrusions shall not be permitted on any gate, refer to ASTM F2200
for exceptions, if any.
Any non-automated gate that is to be automated in any manner
should be upgraded to conform to the provisions contained within
the provisions of this document and ASTM F2200 as applicable.
2.2 - Gate latches
In association with this commercial swing gate operator, at no time
should manual gate latches or locks be used. The forces applied to
a commercial swing gate operator could be in excess of those forces
which are safe for bystanders. Should unnecessary forces be applied
to a gate system which is in the locked position, the catastrophic
failure of the gate or locking mechanism could result in substantial
damage, extensive physical injury and or death.
2.3 - Specific applications
This swing gate operator is intended for those locations where
vehicle traffic is intended to be controlled through the use of an
entryway obstruction (gate). The TITAN12L/12L1 actuator is only
to be used in conjunction with Nice brand control boards. If the
gate, actuator and control system are not fully closed off from public
access, the opening or closing of the gate system may result in
severe damage, injury or death.
2.4 - Swing gates
Swing and slide gate are designed to move across an entry control
point to prevent or allow controlled access by authorized persons
or equipment. Swing or slide gate systems are not necessarily
completely autonomous systems, and require regular maintenance
and inspection on a periodic schedule. Although with certain safety
devices in place the gate system could operate as a completely
independent system free from human interaction for a defined period
of time, human inspection and testing is required to ensure longevity
and safe operation over long periods of time.
912L+(12VDC)
20ft.
600lbs.
Yes
Yes
Yes
120
Yes
Stainless Steel Screw
-4 F to 122 F
19.75lbs.
43"(L) x 4"(W) x 6.75"(D)
Yes
Yes
Yes
Advertisement
Table of Contents
