Appendix A - Mechanical Drawings; Appendix B - Troubleshooting - Marine PC MPC-AWM3V User Manual

APPENDIX A
Mechanical Drawings
Mount diagrams of the MPC-AWM3V and its dimensions may assist you in installation of the
Monitor. You may find them on our website at:
http://www.marinepc.com Look in the Support Tab for Drawings
Mount diagrams of the optional Flush Mount Bezel and its dimensions may assist you in installa-
tion of the Monitor. You may find them on our website at:
http://www.marinepc.com Look in the Support Tab for Drawings
APPENDIX B
Display
Symptom: No light behind button LEDs
Possible Problem
No power, loose power connection
Reverse Polarity
Symptom: Light behind button LEDs, no display, or "No Signal" error message
and/or no image on the display
Possible Problem
Power on, no video signal
UM-MPC-AWM3V(A) 10/2011
Solution
Confirm the Monitor is properly connected to a DC or
AC power source.
Verify the power source is live or try another battery
or AC power outlet.
Verify the Monitor is powered on.
Check polarity of the power connection.
Solution
Verify a video signal is coming out of the signal source
(i.e., plug into a known good display source).
Verify the incoming signal source selected matches
the Monitor signal source (Composite, S-Video).
Check the Brightness front panel setting on the Moni-
tor. This may be set too low.
Check the Brightness and Contrast controls in the
OSD. These may be set too low.
17