Dc Power Connector - Marine PC MPC-AWM3V User Manual

DC Power Connector

• The IP67 sealed DC Power Cable, 3 m (10 ft), is in the accessory box
• Plug in the quick-connect 3-pin connector by lining up the orientation pins, push in and twist
CW until it snaps in place.
• To disconnect, twist the outside ring CCW and pull on the connector away from the unit until
the cable is free
• There are two flying leads: negative: black (-) and positive: white, labeled with (+)
• Connect the flying leads to the corresponding polarity on the DC voltage source
Confirm the DC
connections are made to the
correct polarity.
caution!
Optional AC Power Connector
• The optional AC Power Adapter Cable Set consists of a 3 m (10 ft) cable, the power adapter
and a 1.8 m (6 ft) cable
• The cable accepts voltage from 110 to 250 VAC and frequency from 47 to 63Hz
• The AC power plug is standard for 120 VAC/60Hz, common in North America, and
• Follow procedure above to for connection to the unit.
When connecting or discon-
necting, never pull on the ca-
ble, only hold the connector..
caution!
UM-MPC-AWM3V(A) 10/2011
13