On-Screen Display (Osd) - Marine PC MPC-AWM3V User Manual

ON-SCREEN DISPLAY
The On-Screen Display (OSD) user interface is the path to make all video display signal source
adjustments. The Source Screen Controls Menu provides access to fine-tuning the Display.
OSD Source Screen Controls Menu Activation
To activate the OSD Source Screen Controls Menu in the active video source, press
and release the SELECT button.
Note: OSD Source Screen Controls Menu will close after 15 seconds of inactivity.
OSD Source Screen Controls Menu
The Controls Menu is comprised of seven source screen control categories with
adjustable settings.
Display Category Adjustments
• Press the Select button to access the Controls Menu
• In the Controls Menu, to choose a Display Category, use the RIGHT or LEFT Arrow
button to move UP or DOWN the Controls Menu
• The Controls Menu item changes color, from black to red, when it is active
• When a Controls Menu item is in red, press the Select button to open
• The adjustment controls are the RIGHT and LEFT Arrow buttons, which increase or
decrease the value of the menu item's parameter as noted in the indicator screen
• Create the new parameter value
• Press the SELECT button to save the new value; this returns the User to the Controls Menu
• Move the RIGHT or LEFT Arrow button to move to another Controls Menu item, or
• Move the RIGHT or LEFT Arrow button to Exit.
OSD Source Screen Controls Menu Categories
•
New settings will be stored in memory upon pressing the SELECT button to exit the OSD
Source Screen Controls Menu item.
caution!
• If SELECT is not pressed, or inactivity is detected within the 15 second
factory default OSD menu duration, any screen function adjustments made
will be saved.
UM-MPC-AWM3V(A) 10/2011
It is recommended to adjust the LED back light brightness
to maximum before fine-tuning the OSD Source Screen
Controls Menu Parameter: Brightness.
15