Technical Data; Service; Fuse Replacement (T 980X Only); Heater Relay Removal - Miele T 980x Technical Information

T 980x/T 982x
1

Technical Data

Electrical system

Table 100-1: Electrical System Data

4

Service

4.1

Fuse Replacement (T 980x only)

1. Disconnect the appliance from the power supply.
2. Remove the lid; see Section 010-4.1.
3. Unscrew the black fuse cap (see arrow, Figure 100-1) and remove the fuse.
4. Insert the new fuse into the black cap and screw the cap back into place.

Figure 100-1: Fuse Replacement

4.2

Heater Relay Removal

1. Disconnect the appliance from the power supply.
2. Remove the dryer lid; refer to Section 010-4.1.
3. Disconnect the electrical connections from the appropriate relay. (Relays
are located in front of the fuse; refer to Figure 100-1, if necessary.)
4. Press in on the locking tab and slide the relay forward to remove.
Electric Heating
Dryer fuses (F2); 7 A T, 6.3
mm x 32 mm (0.25" x 1.25")
Heater relays (1K1/1, 2K1/1,
3K1/1): single-anchor relays,
rating 11A; coil: 12VDC,
200Ω
67
Technical Information
Gas Heating
--
Heater relays (1K1/1, 2K1/1)