Technical Data - Miele PDR 510 EL Quick Start Manual

en - Connectivity
Establishing the network connection using a LAN cable
The optional XKM 3200 WL PLT communication module is required for wired network
connection.
On the supervisor level, select  using the  or  arrow buttons.

Then select the COM module  using the  or  arrow buttons.

Confirm with the / sensor control.

Connect the appliance to your router/switch using the network cable. The router/switch

must be connected to the Internet.
The appliance is now successfully connected.

Technical data

System requirements for WiFi
- WiFi 802.11b/g/n
- 2.4 GHz band
- WPA/WPA2 encryption
- DHCP activated
- Multicast DNS / Bonjour / IGMP snooping activated
- Ports 443, 80, 53 and 5353 open
- IP DNS server = IP standard gateway/router
- Mesh/repeater use: same SSID and password as standard gateway/router
- SSID must be permanently visible
System requirements for LAN
- DHCP activated
- Multicast DNS / Bonjour / IGMP snooping activated
- Ports 443, 80, 53 and 5353 open
- IP DNS server = IP standard gateway/router
WiFi signal strength – Guide values
The WiFi signal strength is only a rough guide. These details do not provide absolute cer-
tainty.
The WiFi signal strength can be read via the MDU or directly on the appliance.
96