Electrical Specifications - Extech Instruments 480846 User Manual

Electrical Specifications

Unless otherwise stated, the specifications hold under the following conditions:
• The meter is located in the far-field of a source, the sensor head is pointed towards
the source.
• Ambient temperature:
• Relative air humidity:
Sensor type:
Frequency range:
Specified measurement range:
CW signal (f > 50MHz) :
Dynamic range:
Absolute error at 1 V/m & 50 MHz:
Frequency response:
Sensor (with typical CAL factors) :
Isotropy deviation :
Overload limit :
Thermal response (0 to 50°) :
+23 ± 3
25% to 75%
Electrical field (E)
10MHz to 8GHz
20mV/m to 108.0V/m
53 μ A/m to 286.4mA/m
2 2
1 μ W/m
to 30.93W/m
0 μ W/cm 2 2
to 3.093mW/cm
Typically 75dB
± 1.0dB
± 1.0dB (50MHz to 1.9GHz)
± 2.4dB (1.9GHz to 8GHz)
Typically ± 1.0dB (f>50MHz)
2
10.61mW/cm (200V/m)
± 0.5dB
15 480846 V2.3 7/09