Data Memory - Extech Instruments 480846 User Manual

Data memory

The meter includes a non-volatile data memory that can store a maximum of 99
measured values.
Storing individual measured values
MEM
The current memory location number appears in the lower right small display.
Once you press the MEM key, it will store a displayed value and increment the memory
location by one. Each flash of the "
stored. When the memory location number shows "99", to indicate the manual data
memory is full, the user must clear the entire contents of the data memory before storing
new values.
Reading individual measured values
X
Entry
Y
Z
X
Y
Z
1. Press READ key, the display shows "
2. Press ▼ or ▲ key to select the desired memory location.
3. Press the UNIT key to select the desired reading units.
4. Press the XYZ/CAL key to select the desired sensor axis reading.
►
5. Press the READ key to exit.
" symbol display indicates one reading has been
Reading mode indicate
Reading memory location
Exit
"(reading mode).
11 480846 V2.3 7/09