Setting The Result Mode - Extech Instruments 480846 User Manual

Alarm Limit Value (ALARM)
The alarm limit value is used to monitor the display value automatically. It
controls alarm indication function. The alarm limit value can be edited in the
display V/m unit.
NOTE:Alarm Limit Function is only used for total three axial value comparator.
Setting the units of measurement
Press the UNIT key to step through the units display.
Z
X Y
Z
X Y
(a). Electric field strength (V/m).
(b). Computed magnetic field strength (mA/m).
(c). Computed power density (mW/m
(d). Computed power density (μW/cm

Setting the result mode

Instantaneous result mode is automatically set when the meter is turned on.
Press the MAX/AVG key to step through the results displays:
MAX
AVG
MAX
Z
UNIT
X Y
UNIT
2
Z
UNIT
X Y
2
).
2
).
MAX
AVG
AVG
MAX
AVG
7
UNIT
2
MAX
MAX
AVG
AVG
480846 V2.3 7/09