Related Manuals for Extech Instruments 407510
Summary of Contents for Extech Instruments 407510
- Page 1 User Guide Heavy Duty Dissolved Oxygen Meter Model 407510 1.800.561.8187 information@itm.com www. .com...
- Page 2 Sensor body 10. Sensor plug 11. RS-232 output jack 12. Battery cover (rear) 13. Altitude compensation key 14. O Cal key 15. Zero key 16. Mg/L (DO), O (Air) selection key 17. % Salt key 407510-en-GB_V7.7 11/15 1.800.561.8187 information@itm.com www. .com...
- Page 3 407510-en-GB_V7.7 11/15 1.800.561.8187 information@itm.com www. .com...
- Page 4 /DO switch to the O position. The display will indicate the oxygen air value in %. Temperature Measurements The lower display will indicate the temperature of the measured solution. Press the F key to change the temperature units. 407510-en-GB_V7.7 11/15 1.800.561.8187 information@itm.com www. .com...
- Page 5 The meter includes a RS-232 serial data port. For streaming of data to a PC via the RS232 Output jack, the optional 407001-USB kit (RS232 to USB cable and driver CD) along with the 407001 software (available free at www.extech.com) are required. 407510-en-GB_V7.7 11/15 1.800.561.8187 information@itm.com www.
- Page 6 3. Screw the probe head onto the probe handle. Excess electrolyte may be forced out through the threads. Wipe clean. 4. Lightly tap the probe to remove any air bubbles. Probe handle Temperature sensor Probe Head 407510-en-GB_V7.7 11/15 1.800.561.8187 information@itm.com www. .com...
- Page 7 C (32 to 122 adjustments Salt 0 to 39% Altitude 0 to 3900 meters Copyright © 2014-2015 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form. 407510-en-GB_V7.7 11/15 1.800.561.8187 information@itm.com www. .com...
Need help?
Do you have a question about the 407510 and is the answer not in the manual?
Questions and answers