Haier HCG604W Installation Instructions And User Manual page 10

Installation instructions
8
Fastening the installation brackets
Each cooktop is provided with an installation kit including brackets and screws for fastening
the cooktop to benches from 20 to 40 mm thick.
Remove the pan supports and burners from the cooktop.
1
Turn the cooktop upside down and place it on a soft surface.
2
Fasten the brackets "A" to the appropriate socket holes, without tightening the screws "B" for the
3
moment.
A
Fig. 4 Fastening the installation brackets
Fastening the cooktop
Spread the sealing material "C" out along the edge of the cutout, making sure that the
1
junctions overlap at the corners.
Insert the cooktop into the cutout and position it correctly.
2
Adjust the position of the brackets "A" and tighten screws "B" to secure the cooktop firmly in
3
position (teeth "D" of the brackets should go into the holes).
Using a sharp cutter or trimmer knife, trim the excess sealing material around the edge of the
4
cooktop. Take care not to damage the workbench.
B
D
B
B
A
B
A
B
B
A
C
A
Fig. 5 Fastening the cooktop
A