Torque Transmission - Linde HPR-2 Manual

Torque transmission.

Depending on the selected components, different torques may be transferred. Please ensure that the load transfer components
such as mounting flange, PTO-through shaft and additional pumps are designed adequately. Our sales engineers will be pleased
to provide design advice.
Torque transmission of HPR-02
This shows the input side (A) and PTO- / output side (B) of a HPR-02 pump.
The information on the following pages refers to
>> mounting flange and drive shaft (A)
>>
PTO flange and through shaft (B)
A) Flange profile
Bolt hole dimensions
M1 inside diameter
M2 outside diameter
M3 bolt hole length
Bolt hole diameter
12
55 75
mm 17.5 17.5
mm 34 34
mm 20 20
Rated size HPR-02
105 135 165
17.5 21.5 21.5
40 40 40
20 20 25
Bolt hole length
210 105 D 280
22 17.5 22
- 40 -
26 20 30
165 D
17.5
-
25