Appendix; System Specifications - Cisco 3310 Mobility Services Engine Getting Started Manual

Network management device
Table of Contents

Advertisement

System Specifications

Table A-1
Table A-1
Dimensions
Weight
Power consumption
Voltage
Temperature
Humidity
Altitude
Shock
Acoustic noise
Electrostatic discharge (ESD)
Hard disk
DVD-ROM
Ethernet NIC
Serial port
Video port
OL-17304-02
describes the system specifications for the mobility services engine.
Specifications
1.7 in. high (4.3 cm)
17 in. wide (43.2 cm)
20 in. deep (50.8 cm)
20 lbs (9 kg)
540 W (maximum input, power supply rating)
350 W (maximum output, power supply rating)
Power factor correction
Input low range—90 to 127 (nominal) VAC; 47 to 63 Hz
Input high range—180 to 264 (nominal) VAC; 47 to 63 Hz
Non-operating
Operating
Non-operating—90% relative humidity, non-condensing at
95°F (35°C )
2000 m at 104°F (40°C)
Operating—2.0 g, 11 msec, 1/2 sine
Packaged—Operational after a 24-inch free fall
7 Bels in sound power for a typical office ambient temperature of
65 to 75°F (18 to 24°C)
Note
Tested to 15 kilovolts (kV) with no component damage
Quantity—Two drives
Interface type—Serial-ATA (SATA300)
Capacity—250 GB (each)
8X DVD read, 24X CD read
Two 10/100/1000BASE-T Ethernet (NIC) ports
Two RJ-45 connectors
DB-9 connector for console port and serial communications
DB-15 connector
A P P E N D I X
–40 to 158°F (–40° to 70°C)
50 to 95 °F (10° to 35°C), with the maximum rate
of change not to exceed 50°F (10° C) per hour
Peripheral operation might change the noise level
Cisco 3310 Mobility Services Engine Getting Started Guide
A
A-1

Advertisement

Table of Contents
loading

Table of Contents