Rack Mounting
This chapter provides procedures for installing rail hardware on the mobility services engine and for
mounting the product on a four-post rack.
This chapter contains the following sections:
•
•
•
•
•
Before You Begin
Before you begin the installation, read the Regulatory Safety and Compliance Information for the Cisco
3310 Mobility Services Engine document that shipped with your device.
Tools Needed
You need to have the following tools to complete the rack mounting procedure:
•
•
OL-17304-02
Before You Begin, page 4-1
Unpacking the Mobility Services Engine, page 4-2
Installation Precautions, page 4-2
Removing and Reinstalling the Rack Handles, page 4-3
Mounting the Mobility Services Engine in a Four-Post Rack, page 4-4
A Phillips screwdriver (#1 bit and #2 bit)
Four (4) rack screws
C H A P T E R
Cisco 3310 Mobility Services Engine Getting Started Guide
4
4-1