®
Crestron Adagio
Operations Guide – DOC. 6509B
AMS
Switching Programs
If a custom program is loaded into the AMS, the AMS will run the custom program
when it boots up. To switch to the out-of-the-box program:
1. Press and release HW-R.
2. Press and hold SW-R until "Bypassing Custom Program, Running OOTBF"
is displayed on the LCD.
3. To return to the custom program simply press HW-R or cycle power.
Saving Settings
Settings such as tone/volume levels (out-of-the-box and custom programs) and
input/output names (out-of-the-box programs) are stored in an xml and text file that
can be recalled should a AMS program need to be updated.
To save settings for later use, use the Crestron Toolbox File Manager utility to
retrieve the *.xml (where * can be "ootbf" for settings made when running the out-
of-the-box functionality program or "custom" for settings made when running a
custom program) and System Configuration.txt files from the NVRAM Disk
directory. After the new out-of-the-box functionality program or custom program has
been loaded, use Windows Explorer and Crestron Toolbox' File Manager utility to
place the appropriate *.xml and System Configuration.txt files in the NVRAM Disk
directory and reboot the processor. For instructions on using Crestron Toolbox' File
Manager utility, refer to the Crestron Toolbox help file.
NOTE: If switching to a different type of program (i.e. from out-of-the-box
functionality to custom or vice-versa), the retrieved xml file can be renamed
(ootbf.xml becomes custom.xml and custom.xml becomes ootbf.xml). The running
program will import any relevant settings. Verify that all of the required settings are
correct.
Example Program
An example program for the AMS is available from the Crestron website
(http://www.crestron.com/exampleprograms).
Media System
Media System: Adagio AMS • 99