Eaton FT1455-L2 Operating Instructions Manual page 4

Insert projectile into the nozzle, close faceplate and secure by
pushing the safety release bar forward confirming the release
bar locks into position. (See Figure 5, 6 & 7).
Figure 5
Figure 6
EATON FT1455-L2 Hand Launcher Operating Instructions E-HOAI-CC002-E May 2015
4
Note: The safety release bar and faceplate must always be in the locked
position prior to firing the launcher. Failure to secure faceplate and safety
release bar in the locked position may cause serious injury to the operator and
or damage to the launch.
Figure 7
Step 4: Air source connection
Connect a 1/2" I.D. air hose using the supplied Full Flow Quick
Connect Coupling to the back of the launchers' 5 micron air filter
as shown. (See Figure 8).
Figure 8