Philips MRV640 Service Manual page 59

Nucleus Name DS_SYS_DisplayFatalOn
Nucleus Number 1223
Description Turn on the display-fatal functionality which displays debug-information on the dis-
play when encountering a fatal error condition from which could not be recovered au-
tomatically
Technical -
-
Execution Time Less than 1 second.
User Input None
Error Number
122300
122301
122302
122303
122304
Example DS:> 1223
122300:
Test OK @
Nucleus Name DS_SYS_DisplayFatalOff
Nucleus Number 1224
Description Turn off the display-fatal functionality which displays debug-information on the dis-
play when encountering a fatal error condition from which could not be recovered au-
tomatically
Technical -
-
Execution Time Less than 1 second.
User Input None
Error Number
122400
122401
122402
122403
122404
Example DS:> 1224
122400:
Test OK @
Nucleus Name DS_SYS_DisplayFatalGet
Nucleus Number 1225
Description Get the display-fatal flag of the recorder
Technical -
analogue board
-
Execution Time Less than 1 second.
User Input None
Error Number
122500
122501
122502
122503
122504
Example DS:> 1225
122500:
Test OK @
Nucleus Name DS_SYS_SettingsSet
Nucleus Number 1226
Description Programs the digital board settings into the boot EEPROM on the digital board.
Diagnostic Software
Issue the command to use the display-fatal functionality to the analogue board
Wait for the result and return this to the user
Description
Turning on the display-fatal functionality succeeded
Turning on the display-fatal functionality failed
The returned errorcode from the analogue board is un-
known:
No DS errCode known for analogue board error:
There was no response from the analogue board.
Issue the command to stop using the display-fatal functionality to the analogue
board
Wait for the result and return this to the user
Description
Turning off the display-fatal functionality succeeded
Turning off the display-fatal functionality failed
The returned errorcode from the analogue board is un-
known:
No DS errCode known for analogue board error:
There was no response from the analogue board.
Issue the command to get the status of the display-fatal functionality to the
Wait for the result and return this to the user
Description
Getting the display-fatal flag succeeded
Getting the display-fatal flag failed
The returned errorcode from the analogue board is un-
known:
No DS errCode known for analogue board error:
There was no response from the analogue board.
DVDR615, MRV640 5. EN 59