Philips MRV640 Service Manual page 33

90003
90004
90005
90006
90007
Example DS:> 900
090000:
Test OK @
Nucleus Name DS_BE_Reset
Nucleus Number 901
Description Reset the basic engine
Technical -
Execution Time 2 seconds
User Input None
Error Number
90100
90101
Example DS:> 901
090100:
Test OK @
Nucleus Name DS_BE_GetSelftestResult
Nucleus Number 902
Description Return the self-test results through the service port
Technical -
-
Execution Time Less than 1 second
User Input None
Error Number
90200
90201
90202
90203
90204
90205
90206
90207
Example DS:> 902
090200:
Test OK @
Nucleus Name DS_BE_VersionGet
Nucleus Number 903
Description Get the version of the basic engine and that of the optical unit
Technical -
-
Execution Time Less than 1 second
User Input None
Error Number
90300
90301
90302
90303
90304
90305
90306
Example DS:> 903
090300: BE version = 20.09.18 Optical unit version = 3C.00.09.41.08
Test OK @
Nucleus Name DS_BE_TrayOut
Nucleus Number 904
Diagnostic Software
The Basic Engine returned an error code
No acknowledge received from BE
Communicating with the Basic Engine failed
Echo check failed, no echo received
Echo check failed, received wrong pattern
Toggle the reset pin of the I2S interface
Description
Resetting the Basic Engine succeeded
Resetting the Basic Engine failed
Send the GET_SELF_TEST_RESULT command
On error display the error received form the BE
Description
Self test succeeded, no errors
There was a time-out while communicating
The Basic Engine returned an unexpected result
The BE returned an error code
No acknowledge received from BE
Communicating with the Basic Engine failed
Basic Engine returned no info
Self test failed, errors are echoed
Send the GET_VERSION_NUMBER command
Display the returned version
Description
BE version OK
There was a time-out while communicating
The Basic Engine returned an unexpected result
The BE returned an error code
No acknowledge received from BE
Communicating with the Basic Engine failed
The BE returned no info
DVDR615, MRV640 5. EN 33