Printer Application Setup - LinkPoint AIO Reference Manual

Printer Application Setup

To change the printer factory default application; follow the steps outlined below. THERE IS
USUALLY NO NEED TO CHANGE THESE SETTINGS! This should only be performed by
authorized persons only.
Display Message
SWIPE CARD FOR SALE
JAN-03-00 MON 12:00P
[ ] [ ]
CLEAR_to_resume
_ Time Load Setup
[ ] [ ] [
Setup
Ports Model Test
[ ] [ ]
Port_setup
Printer RS232 Pinpad
[ ] [ ] [
Printer_setup
Download Reload
[ ] [ ]
Enter Password:
_
[ ] [ ]
LoadPoint XMODEM
[ ] [ ]
LinkPoint
This information is Proprietary and Confidential to LinkPoint International - Reproduction without the expressed,
02/27/03
Operator Action
Hold down the [ALPHA] key and press [7] [1] [3] [9].
Release the [ALPHA] key to enter the boot mode.
[ ]
Press the right [
]
Press the left [
[ ]
Press the left [
]
Press the left [
[ ]
Key in the password [4][6][5][1][0][7][0] and press
[ENTER].
[ ]
Press the left [
[ ] to select XMODEM.
[ ]
written consent of LinkPoint International is prohibited.
] key to select SETUP.
] key to select PORTS.
] key to select PRINTER.
] key to select DOWNLOAD.
] key to select LoadPoint or the right
Restaurant/Retail Application
28