Annual Maintenance - barbas CUATRO-3 75 Installation Instructions & Manual For Annual Maintenance

Wood-burning insert/built-in appliance
Table of Contents

Advertisement

5

ANNUAL MAINTENANCE

It is essential that the appliance, the chimney and the
combustion air supply are cleaned and inspected
annually, by a Barbas-dealer/expert.
The safe operation of the appliance will thus remain
guaranteed.
Start with maintence 24 hours after the last burning period.
Recommended order for yearly maintenance:
Inside the appliance:
Check the door seals. If necessary, replace the seals.
Temporarily remove the door, by opening it competely and lifting it upwards.
Remove the complete interior of the appliance (see Chapter 6) and carefully
clean all parts with a hand brush.
Emptying the ashtray.
Clean the glass on the inside of the door with glass spray or ceramic hob
cleaner.
If the glass is broken or cracked, it must be immediately replaced before
operating the appliance again.
Check the grate and all interior plates on cracks.
If necessary, replace the parts.
Chimney/fl ue channel:
Sweep and inspect chimney. Check for cracks, loose parts, fl ue gas leakage
and overall condition of the chimney.
When in doubt use an inspection camera !
Combustion air supply applianced:
Check the combustion air supply route from the outside up to the appliance.
Clean the combustion air supply inlet openings.
56
Broken ceramic heat-resistant glass
may not be thrown away in a glass
container, but must be included in
normal household waste.
CUATRO-3 75
Installation instructions

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents