barbas BOX 52 Installation Instructions & Manual For Annual Maintenance

Advertisement

Quick Links

INSTALLATION INSTRUCTIONS &
MANUAL FOR ANNUAL MAINTENANCE
Barbas wishes you many cosy evenings with your new fi re
This document is an essential part of your fi re. Read it carefully before
installation and maintenance of the gas fi re and keep it in a safe place!
Version number: 02 - 343033
Date: 14-11-2016
BOX 52
Serial number:
Production date:

Advertisement

Table of Contents
loading

Summary of Contents for barbas BOX 52

  • Page 1: Installation Instructions

    MANUAL FOR ANNUAL MAINTENANCE BOX 52 Barbas wishes you many cosy evenings with your new fi re This document is an essential part of your fi re. Read it carefully before installation and maintenance of the gas fi re and keep it in a safe place!
  • Page 3 BOX 52 Installation instructions...
  • Page 4 BOX 52 Installation instructions...
  • Page 5: Table Of Contents

    BOX 52 TABLE OF CONTENTS Page Introduction 1.1 General ....................1.2 Safety and installation instructions ............Placing 2.1 Included ....................2.2 Preparation for positioning ..............2.3 Accessories ..................Installation 3.1 Instructions ................... 3.2 Flue gas channel .................. 3.3 Fitting ....................
  • Page 6 BOX 52 Installation instructions...
  • Page 7: Introduction

    BOX 52 INTRODUCTION 1.1 GENERAL The appliance must be positioned and connected by a Barbas dealer/specialist in accordance with the following installation instructions, nationally and locally applicable regulations. This manual contains directions for both positioning the appliance and for its environmentally-friendly use.
  • Page 8 The required constructive adaptations should be satisfi ed as well. • It is essential that the appliance, the fl ue and combustion air supply are cleaned and inspected annually by a Barbas dealer/specialist. The safe operation of the appliance will thus remain guaranteed.
  • Page 9 BOX 52 • Read the “Directions for use” before using the appliance for the fi rst time. When you fi rst fi re up your appliance, there are a number of extra points you should take into account. • In transit, some parts of the appliance may have moved from their original place.
  • Page 10: Included

    BOX 52 LOCATION INCLUDED Set documentation • Directions for use • Installation instructions Attributes • Glove (Heat resistant up to max. 95°C) • Operating hook / Poker N.B. If any part is missing, please contact your dealer. ACCESSORIES The following accessories can be supplied by your dealer:...
  • Page 11: Preparation For Positioning

    BOX 52 PREPARATION FOR POSITIONING Check all functions of the appliance before fi tting. • Check the opening and closing operation of the door. Turn the handle all the way down: Door is locked. Handle forwards: The door releases from its lock and can be opened forwards.
  • Page 12 BOX 52 • Check whether the 2 baffl e plates are located correctly in the supports. • Check the operation of the slider for the regulation of the combustion air intake (middle below the window). • Check whether the ashtray is completely empty.
  • Page 13: Installation 3.1 Instructions

    BOX 52 INSTALLATION INSTRUCTIONS 3.1 FITTING INSTRUCTIONS When fi tting the stove, local and/or national regulations relating to fi re safety must be followed. In case of doubt, consult the fi re safety department of the local fi re brigade, particularly if the stove is to be fi...
  • Page 14 BOX 52 Between the stove and chimney, use thick-walled smoke piping (Steel, ≥2 mm). See Chapter 2.2. The fi rst pipe connected to the appliance must have a diameter of 130 mm at both ends. This will prevent any condensation from the chimney running over the external end of the pipe.
  • Page 15 BOX 52 If the dwelling has mechanical ventilation that creates under pressure in the room where the appliance is located, it is necessary to fi t a fl ue gas fan. The type of fl ue gas fan is dependent on the capacity of the mechanical ventilation system.
  • Page 16 BOX 52 FITTING THE STOVE 3.4.1 Positioning The appliance can make use of either a top or rear connection Ø130 mm for the fl ue (chimney). This connection is intended for steel stovepipes, double/single-skinned stainless steel (insulated) fl ues or double/single-skinned fl exible stainless steel fl ues.
  • Page 17 BOX 52 3.4.2 Connecting to the chimney Ceiling connection: Insert a pipe into the sliding sleeve (niche pipe) to the ceiling as deep as possible. Position a chimney pipe on the top plate and mark off where the top pipe should be shortened.
  • Page 18: Operation

    BOX 52 OPERATION Figure 1: Operation Box Handle Ceramic heat-proof glass Grate Ashtray Combustion air-supply slider (Combined operation for the primary, secondary and tertiary combustion air-supply) Inlet opening (2x) combustion air from living-room, if a direct outside air supply is not connected.
  • Page 19 BOX 52 Figure 2: Operation Box with wood log storage module Handle Ceramic heat-proof glass Grate Ashtray Combustion air-supply slider (Combined operation for the primary, secondary and tertiary combustion air-supply) Inlet opening (2x) combustion air from living-room, if a direct outside air supply is not connected.
  • Page 20: Annual Maintenance

    ANNUAL MAINTENANCE It is essential that the appliance, the chimney and the combustion air supply are cleaned and inspected annually, by a Barbas-dealer/expert. The safe operation of the appliance will thus remain guaranteed. Start with maintence 24 hours after the last burning period.
  • Page 21 Wait for the appliance to cool down suffi ciently before cleaning. Never use scouring powder, aggressive cleaners or fi re polish on the appliance. • Any lacquer damage can be repaired with a BARBAS heat resistant paint spray can. (Pay atention that the appliance is suffi ciently cooled down !) …...
  • Page 22: Replacement Parts

    BOX 52 REPLACEMENT PARTS Pos nr. Article no Description 340385 Baffl e plate stainless steel 339999 Stone baffl e plate 339921 Stone side left 339998 Stone rear 340378 Bottom 340377 Combustion grate 339920 Stone side right 340379 Wood rack 340432 Ceramic glass When ordering, please give the serial number.
  • Page 23 BOX 52 Pos nr. Article no Description 340385 Baffl e plate stainless steel 339999 Stone baffl e plate 339921 Stone side left 339998 Stone rear 340378 Bottom 340377 Combustion grate 339920 Stone side right 340379 Wood rack 340432 Ceramic glass When ordering, please give the serial number.
  • Page 24 BOX 52 SEQUENCE FOR REPLACING THE INTERIOR OF THE APPLIANCE • Remove the grate and the ashtray. Although the heat resistant panels have been manufactured with the greatest care, there is the possibility that some sharp parts may stick out, possibly causing injuries. We therefore urgently recommend wearing safety gloves when handling the panels.
  • Page 25 BOX 52 • Unscrew the locking pin with the aid of an Allen key and a wrench. You can now remove the top baffl e plate by pulling it forward slightly and then tipping it downwards The baffl e plate can now be pulled forwards and out.
  • Page 26 BOX 52 • Remove the bottom baffl e plate by lifting it slightly and removing it sloping to one side. • Remove carefully the rear panel, by lifting it upwards and remove it diagonally forward. • Remove carefully the left-hand side panel.
  • Page 27 BOX 52 • Remove carefully the right-hand side panel. Make sure the rear panels do not fall forwards ! • Finally, remove the wood rack. The entire interior is now disassembled. The interior is reassembled in the reverse order. Make sure, when reassembling the interior to start with the wood rack.
  • Page 28: Dimensions

    BOX 52 DIMENSIONS BOX 52 Installation instructions...
  • Page 29 BOX 52 BOX 52 WITH WOOD LOG STORAGE MODULE Installation instructions...
  • Page 30: Technical Data

    BOX 52 TECHNICAL DATA Combustion: Measured in compliance with EN 13240 : 2001 and EN 13240 - A2 : 2004 Fuel Wood Nominal output 8 kW Effi ciency Emissions (dry, at 13% O , 273 K, 1013 hPa): Carbon monoxide (CO) 0.06%;...
  • Page 31: Warranty Terms

    2.3. Complaints will only be accepted if they are reported to the Barbas dealer, together with the serial number of the Barbas appliance which is stated on the front of the instructions for use. 2.4. In addition, the original receipt (invoice, receipt, cash receipt) showing the date of purchase must also be submitted.
  • Page 32 Article 5: Warranty period 5.1. This warranty will only be granted during the warranty period. 5.2. The body of the Barbas appliance is guaranteed for a period of 10 years against construction and/or material faults, starting from the moment of purchase.
  • Page 33 BOX 52 Installation instructions...
  • Page 34 BOX 52 Installation instructions...
  • Page 36 Your Barbas dealer 02 - 141116 - 343033...

Table of Contents