Extreme Networks Extreme Wireless Site Preparation And Installation Manual page 37

External antenna with wave 2
Table of Contents

Advertisement

Table 13: Antenna Connector Connectors
Antenna Model
WS-AO-DX13025
WS-AI-DX07025
Mounting Antenna Model WS-AI-DX02360
The WS-AI-DX02360 is a dual-band six port omni-directional MIMO antenna. With separate ports that
are designed to operate at 2.4 GHz and 5 GHz. Each of the MIMO antenna R-SMA ports can be
connected to an access point by means of a coax pigtail.
The antenna is designed for ceiling mounting in indoor locations.
Figure 21: WS-AI-DX02360 Antenna
Mounting the WS-AI-DX02360
For best results, mount the WS-AI-DX02360 at ceiling level near the center of the coverage area. A line-
of-sight path between the antenna and active floor locations work best. Avoid mounting next to a
column or vertical support that could create a shadow zone and reduce coverage to one portion of the
room.
A threaded post on the back side of the Antenna and a mounting nut (supplied with the antenna) are
the primary mounting configuration when access is available to both sides of the mounting surface,
such as suspended ceiling tile.
ExtremeWireless™ External Antenna with Wave 2
Type
Connector Type
Outdoor
Reverse Polarity, Type N Plug
Indoor
Reverse Polarity, Type SMA Plug
Antenna Installation
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents