Extreme Networks Extreme Wireless Site Preparation And Installation Manual page 35

Figure 18: Mounting the WS-AO-5DIPN3 Antenna to the AP3865e
1 Antenna
2 Nut
3 Standard polarity Type-N plug
To install the antenna:
1 Secure the antenna in place by tightening the single nut (item 2).
2 Seal the connection between the Type-N jack (item 4) of the AP3865e and the Type-N plug (item 3)
of the antenna by wrapping a layer of sealing tape (item 6).
Mounting Antenna Model WS-AO-DX07180N
The WS-AO-DX07180N is a dual-band, six port (three for each band) Sector antenna providing
coverage of 2.4 GHz and 5 GHz broadband wireless frequencies in a low profile housing. The antenna
provides optimal coverage for areas or events with a large number of mobile data users. It is designed
for outdoor installations using 802.11a/b/g/n multi-band wireless LAN access point radios.
connector and cable information for the antenna.
The mounting kit includes a heavy duty articulating mount for a wall or mast mount installation. UL 94-
HB materials are used for compliance with strict building code safety specifications.
ExtremeWireless™ External Antenna with Wave 2
4 Standard polarity Type-N jack
5 AP3865e
6 Sealing tape (recommended, but not supplied)
Antenna Installation
Table 12 lists
35