Extreme Networks Extreme Wireless Site Preparation And Installation Manual page 29

3 Assemble the brackets item 3) with the arc toward the outside. Slide aluminum spacer (item 5) in
between and feed pivot bolt (item 4) through. Install washers and nut (items 1, 6, 7), but do not
tighten at this point.
Figure 10: Assemble the Brackets
4 Assemble locking carriage bolt (item 2) and attach washers and nut (items 1, 6, 7), but do not
tighten at this point.
Figure 11: Install Carriage Bolt
ExtremeWireless™ External Antenna with Wave 2
Antenna Installation
29