Extreme Networks Extreme Wireless Site Preparation And Installation Manual page 34

Figure 17: Mounting the WS-AO-2DIPN3 Antenna to the AP3865e
1 Antenna
2 Nut
3 Standard polarity Type-N plug
To install the antenna:
1 Secure the antenna in place by tightening the single nut (item 2).
2 Seal the connection between the Type-N jack (item 4) of the AP3865e and the Type-N plug (item 3)
of the antenna by wrapping a layer of sealing tape (item 6).
Note
The AP3865e supports one package of WS-AO-2DIPN3 antennas (one 3-pack) as shown
in Figure 17
Mounting Antenna Model WS-AO-5DIPN3
You can mount the WS-AO-5DIPN3 antenna directly to the AP3865e. The AP3865e supports one
package of three WS-AO-5DIPN3 antennas (one 3-pack).
ExtremeWireless™ External Antenna with Wave 2
4
5
6
on page 34.
Standard polarity Type-N jack
AP3865e
Sealing tape (recommended, but not supplied)
Antenna Installation
34